Christmas Star Lamp DIY with PolarLab Perfect Cut
It is getting cold and Santa's nearby. You can brighten your home up and guide him there, with a shining star.
⭐🎄
The original intention of Perfect Cut is to use a combination of modules to precisely and effortlessly control the cutting angle so that everyone can achieve difficult works in the simplest way, even with more fun.
So we made a short clip of building this elegant lamp and invite you to build your own.
⭐18°, 37°, 45° are the magic cutting angels for the star.
Get your Perfect Cut ready and let's go!
Download the Cutting Template and Instructional Graphics here
Preparation
- Cutting Template (A4) x 5 (check the link above)
- Instructional Graphics x 1 (check the link above)
- The Perfect Cut set x 1
- Scissor x 1
- Magic tape x 1
- Cutting Material: Corrugated board (A4*) x 5 (or your preference)
* A4 is similar to letter size
DIY Steps (refer to the instructional graphic)
- Adjust the Vari-Angle Module with： 18°, 37°, 45°, then align the cutting depth with your cutting material's thickness.
- Attach the cutting template onto the material.
- Align the arrows of Perfect Cut ruler and the ones on the triangles.
- Cut the triangles off the material sheets.
- Attach the triangles together as shown. 37° to 37°, while 18°s stays on the same side. So now you get 10 diamonds
- Attach the 5 diamonds together as shown. So now you get 2 half stars.
- Attach the 2 half stars together as shown, with the light installed.
- Well done, now light the star up and wait for Santa...⭐ 🎄
Save your energy for creativity.
- PolarLab USA